The reviews are automatic translation.
On 2017-08-11 16:14:16
I was able to use it without problems with how I used it. I think it's good.
Shine precious metal parts
On 2017-08-09 19:41:28
Only 8000 could not be polished at all. To be accurate, I could polish at first, but after that it is like a diamond particle is not contained. Is not the diamond uniformly diffused? Other numbers can be polished without problems. (I got the 8000 to be exchanged, but it also leaked out with a hole in the lid.)
Barber scissor polishing
On 2017-07-06 09:25:25
Cospa is good, it is convenient as it arrived quickly.
I will repeat.
Buffed finish of precious metal parts of jewelry and watches
On 2017-04-14 16:07:05
Start polishing from # 1200 depending on the depth of the scratch. # 14000 is best for the final mirror finish of scratching.
Repair of mechanical parts.
On 2017-03-04 11:19:23
It was good that the polished surface was fine. The result was good with other counts also used.
Mirror surface of kitchen knife
On 2017-01-20 15:17:42
Although it is cheap, it can be used normally, and if it is used up to 60,000 number it can be quite a mirror surface.
Luster glaze etc. gloss finish
On 2017-01-06 16:45:34
I use it as a gloss finish of a necklace top. Attach it to the felt wheel with shaft, use it with water. At # 12000, I feel somewhat cloudy, but at # 60000 it will be a satisfying shine.
Final finish of cut edge of transparent acrylic plate
On 2016-10-29 15:04:34
If you cut the transparent acrylic block yourself, the edge will inevitably become cloudy. Sharpen with # 1000 to 2000 with liquid abrasive, finished, finished with this, it is shiny transparent. However, I need perseverance ...
On 2016-06-02 18:57:51
# 1200 # 3000 # 8000 Three types were purchased, but compared with those of another company made 5 g 5000 yen, it can not be brushed. Although it is not bad, although it is not bad, in a small amount it has less feeling of polishing so it may be better to use it in large quantities It can not be polished
Finishing of polishing, lapping
On 2016-05-05 17:01:38
Because the price is cheap and the finish can be cleaned, I think that it is very good