The reviews are automatic translation.
Maintenance of the engine of the original class
On 2017-06-24 03:35:51
At first it was good, but as the engine is heavy, movement has slowed little by little.
Also, the rubber feet attached to the bottom was lost indefinitely.
Since I am missing, I have begun to wobble.
At the time of chemistry experiment
On 2017-06-18 14:35:35
It is used for liquid stirring. It is sturdy and cheap. Please also sell larger products
On 2017-02-22 06:19:46
It is used as an aid when separating products. Accuracy is sufficient, but I think that it is good if the movement of the steering wheel is a little smoother.
Machine assembly and maintenance
On 2016-12-12 14:47:26
It seems to be useful because it is compact! Easy to work as you can secure the height
The table at the time of experiment
On 2016-09-29 17:34:43
The periphery of the screw that is holding the board is distorted, and the top is not flat. Screws get caught.
Used for level adjustment during testing.
On 2016-07-01 18:45:10
Conventionally, the spacer was used to adjust the level, but it is convenient to adjust in mm units. I think that the lowest thickness is a little lower.
Basket of hobbies fishing fishing electric rails
On 2016-04-22 18:07:52
It's heavy and it's tough to carry, so one of the two was divided into friends. Only weight (It can not be helped because the usage is different.
On 2015-08-13 18:59:37
We measured the tilt in the left-right direction when the lift knob was in front. <Right after purchase> Raised direction rotation (rotate the knob to the right): When turning downward by 0.9 degrees to the right (turning the knob to the left): Left 1.1 degrees * The inclination of plus or minus 2 degrees is at the time of ascent and descent. You can see the tilt change visually. <After 2 days from purchase> When turning upward (rotate the knob to the right): 2.1 degrees to the right when turning downward (rotate the knob to the left): 3.5 degrees to the left * It is in time. The play is getting bigger in a few days using it. If you rotate it gently in the downward direction, the notebook computer on the table will start to slide. (It is not like falling down) I bought it to adjust the tilt of the bench using 2 units, but I can not use it if I choose the direction to use. It is difficult to ascend and descend while maintaining parallel alone. Especially the gradient will gradually become bigger while using it. However, it is super cheap. It can be said that it is suitable for price.
Optical bench test
On 2015-08-13 17:28:58
Products of this kind range from thousands of yen to nearly 100,000 yen, but this machine is the cheapest model. It does not cost an expensive model with precision, and although the rotation of the knob also remains astringent, it was enough for the application to put parallels by using a leveler placed under both ends of an optical bench near 10 kg.
Height adjustment relative to step of the work table
On 2015-08-06 17:21:51
Although I bought three cars up to now, although the steering wheel is hard from the viewpoint of feeling and there are individual variations, I can use it well.