Customer Reviews of Solder Wire
The reviews are automatic translation.
Showing 1 - 20 of 56 Reviews .
Soldered to the substrate
On 2017-01-06 17:16:45
It is satisfied as compared to the other non-defective product. What to say even if the price is good value.
This review is about item#9151536.
Used as the substrate and the sheet metal (shield case)
On 2017-01-02 15:58:47
In the soldering of the board, it can be used without any problem. In addition, in order to be soldered in the sheet metal (galvanized sheet) wet very well, Work is easier.
This review is about item#9151511.
When the electronic board maintenance
On 2016-10-19 17:18:30
Solder wettability in the RMA type is also good, is sufficient for the soldering of even small electronics flux scattering and smoke. Price also I think entering the low-cost category in the RMA type.
This review is about item#9151536.
Electronic tools, and the like.
On 2016-10-19 16:27:19
It is the price in spite of use normally solder paste or the like may in cheap.
Soldering of the cable
On 2016-10-05 16:19:30
Connector to be easy to ride the solder, I think it very good because luster even come out.
This review is about item#19532564.
On 2016-08-29 17:54:25
So thin, it is the use planned for mounting parts.
All soldering work of the lead wire
On 2016-08-28 18:06:26
No big complaints, trouble. But it is displayed or will not be in meters displayed in KG (kilogram)?
This review is about item#19532537.
Weak electric wiring work
On 2016-08-17 09:08:25
Because pretty price to be bought at a local DIY store, winding solder Monotarou has survived may cost performance.
Soldering of the prototype
On 2016-06-15 21:36:22
Looks can be satisfied with the very good visual inspection wettability
Soldering of electronic components
On 2016-05-13 14:51:54
Stretch out it is both a good balance. It can also be used without a problem in a small pit flat IC. This will be the purchase of a second time.
Wiring connection of electronic boards and electronic parts
On 2016-04-18 09:53:31
Since the solder in use is now running low, I bought. It does not change the conventional use goods and the quality and feel, but the campaign code was also able to buy fairly cheap to use. Thank you very much.
Foolish question have this question? Ikigashi masu ...... like to use non-solder
On 2016-03-01 23:37:04
Finish of Naka good gloss.
On 2016-02-27 19:35:29
Cheap but we can very well! !
Electronics kit production
On 2015-09-30 14:49:05
It was easy to use very much.
On 2015-09-30 09:33:22
There is a little corner stood tendency when you release the tip. The residue good difficult out brown burnt color also use the temperature of the soldering tip at slightly higher. Since the solder surface after the solder is also a beautiful mirror, finish is beautiful. I think that's a good commodity.
Repair work of electronic components
On 2015-09-19 13:10:09
As an inexpensive lead solder that can be purchased stable in this day and age, I feel that there is a sufficient existence value. Since there are still good use in the lead is being purchased to continue.
Use the terminal solder of mini motor
On 2015-02-11 12:04:01
It uses when attaching a lead wire to a lug of mini motor. Because it does not require the solder RoHs subject we have always use this winding solder RH60. Is a reasonable price including shipping. Since I arrived the next day if you order when the solder of the remaining amount is low it is very useful.
This review is about item#09151527.
Printed circuit board repair
On 2014-11-27 21:13:16
This review is about item#09151511.
Normal supplies in-house
On 2014-06-04 06:15:13
Recently, because I feel like was a lot a little smoke, improvement hope.
Wireless equipment soldering
On 2014-05-16 13:49:02
With regard to product We will be very happy, but very thankful and proceed with this price is cheap.
Customers Who Viewed This Item Also Bought
Tip Saw Japan
SUGANO ELECTRIC LABORATORY
8.60 - 15.40 SGD
HOZAN TOOL INDUSTRIAL