Buy more than* S$200* and get FREE SHIPPING

Safety Gears

Sort by:
Showing 1 - 60 of 3,376 Results
Show: 30 60 90
VIEW: Grid View List View
Roll, Non Slip
DIATEX
93.83 SGD
ADD TO CART
Purpose: Antislip of load. Antislip of curing sheet. Antislip of door mat and kitchen mat, etc., Type: Roll type, Weight (g): 1924, Color: Black, Thickness (mm): 0.2, Width (mm): 1100, Length (mm): 10000, Material: Polyolefin, TRUSCO Part Number: 387-1380
Category Safety Gears > Disaster prevention product > Fall Prevention Products > Non Slip Mats
Full Harness Safety Belt
FUJII DENKO
4.00(6)
259.90 SGD
Thigh Belt Width (mm): 45, Shoulder Belt Width (mm): 45, Secondary Lanyard Diameter (mm): 11, Lanyards (length) (mm) : (Main lanyards) 1700, (Vice lanyards) 1300, Lanyards (Diameter)(mm): 11, Belt Dimensions (mm): 45, Specification: With shock absorber, body belt type
Category Safety Gears > Safety Belts > Harness Type
Noise Reduction Ear Plugs
NOGA
3.67(9)
8.65 SGD
Mass (g/piece): 6, NRR Value: 10 - 33.4dB, Code: Not available, Specification: Case included
Category Safety Gears > Ear plugs and Earmuffs > Earplugs
Ultra High Performance Helmet, Venti, Hard Hat
TOYO SAFETY
51.14 - 82.96 SGD
Caution: This product is manufactured in Japanese standards. Please check the specification before you order.
Category Safety Gears > Hard Hats > Hard Hats
Horizontal reel safety belt G reel
Tajima Tool
4.33(3)
139.90 - 189.90 SGD
Category Safety Gears > Safety Belts > 1 Hanging (Winding Type)
Window Film
TRUSCO
13.83 - 21.17 SGD
Length (m): 1.8, Thickness (mm): 0.065, Material: Polyester film
Category Safety Gears > Heat Measures > Heat Shield Sheet
Reflective Safety Vest
COVER WORK
15.10 - 16.11 SGD
Purpose: Construction sites, Adjustable Waist Circumference (cm): Up to 130, Tape Width (mm): 70
Category Safety Gears > Safety vest and Signal lights > Safety Vest
Ear Plugs
3M
2.13 SGD
ADD TO CART
Frequency (Hz)/Sound Isolation Value (dB)/Standard Deviation (dB): 125/26.7/5.8 250/29.2/4.0 500/31.1/4.4 1000/31.6/3.8 2000/34.0/2.9 4000/36.3/3.4 8000/39.5/6.1, NRR Value: 24, Material: (PLUG) NEOPRENE, (CORD) PVC, Type: Earplug (flange type) with cord, Description 2: Can be mounted without touching the pieces that go into the ear canal and is resistant against dirt from hands and sanitary.
Category Safety Gears > Ear plugs and Earmuffs > Earplugs
Padlock
MonotaRO
6.39 - 7.64 SGD
Material: Copper, Accessories: Two key
Category Safety Gears > Security Equipments > Padlock and Lock > Lock
Safety Vest
MonotaRO
8.87 SGD
Purpose: When walking or working at night., When walking or working at night., Adjustable Waist Circumference (cm): 80 to 130, Clothes Length (cm): about 55, Tape Width (mm): 50 (Reflective tape), Weight (g): 105, Size: One Size Fits All, Material: Vest and reflective tape: Polyester 100%, Specification: hook and loop fastener Tape attached
Category Safety Gears > Safety vest and Signal lights > Safety Vest
LED Traffic Wand
MonotaRO
11.44 SGD
ADD TO CART
Number of Using LED (Piece): 6, Batteries: C size battery x2(sold separately), Weight (g): 144 (battery not included), Diameter (phi mm): 30, Color: Red, Overall Length (mm): 535, Dimension (mm): Lighting Department / 340
Category Safety Gears > Safety vest and Signal lights > Safety Baton
Suspenders
FUJIYA
5.00(1)
44.81 SGD
ADD TO CART
Dimensions c(mm): 190 - 400, Dimensions b (mm): 600, Dimensions e (mm): 120 - 300, Dimensions a (mm): 1440 (Maximum effective area), Dimension d (mm): 140 - 480, Weight (g): 244, TRUSCO Part Number: 369-4348
Category Safety Gears > Belt, Belt Supporter > Supporter > Suspender
Hard Hat, Safety Helmet
Otokomae MonotaRO
26.11 SGD
Caution: This product is manufactured in Japanese standards. Please check the specification before you order., This product is manufactured in Japanese standards. Please check the specification before you order., Purpose: For flying-falling object protection, during crash, for electrical insulation (withstand voltage 7000V or less, test voltage 20000V in water 1 minute), For flying-falling object protection, during crash, for electrical insulation (withstand voltage 7000V or less, test voltage 20000V in water 1 minute), Impact Absorption Liner (Polystyrene Foam): Available, Outer Dimensions (Length L x Width W x Height H) (mm): 272.5x190x161, Weight (g): 350, Material: ABS resin
Category Safety Gears > Hard Hats > Hard Hats
Cable Lock
AiAi
3.25(4)
11.37 SGD
ADD TO CART
Material (wire parts): Stainless PVC coating, Material (Body): Zinc die-cast, Usage: Change number: initial number is 000. Set number to current one, press and hold tip of a ballpoint pen on the button at the bottom and change number one by one. After number changed. release the ball-point pen. Unlock: after that match the release number, you can unlock by pressing down lever with a finger., Description 2: We are maintaining the durability using the zinc die-cast in the main body. left side is out there 2.0phix85mm, ease of use and flexible, you can enjoy the wire of included. It is a one color satin chrome but appearance will be matched with anything without choosing the application. will produce a tablet in your life how to use in accordance with the applications., Specification: W...
Category Safety Gears > Security Equipments > Padlock and Lock > Dial Lock
Hard Hat, Folding, Bloom
TOYO SAFETY
4.00(4)
62.00 SGD
Caution: This product is manufactured in Japanese standards. Please check the specification before you order., Material (hammock): Synthetic resin, Material (chin strap): Synthetic resin, Material (headband): Synthetic resin, Materials (cover): (Middle cover) ABS resin, Size (cm): 52 to 61, Material: PP + PE resin, Specification: (Chin Strap) One Touch
Category Safety Gears > Hard Hats > Hard Hats
Helmet Chin Strap
TANIZAWA SEISAKUSHO
5.00(6)
5.33 - 29.62 SGD
Caution: This product is manufactured in Japanese standards. Please check the specification before you order., Material: Polypropylene
Category Safety Gears > Hard Hats > Hard Hat Related Products > Chin Strap
Floor Marking Tape, Tiger
Otokomae MonotaRO
9.34 - 15.40 SGD
Rewinding Force (N/25mm): 6.1, Holding Power (mm/15minites): 0.2, Tensile Strength (N/25mm): 136.5, Tape Thickness (mm): 0.3, Extensibility (%): 7, Tape Length (m): 25
Category Safety Gears > Safety stripe tape
Pen Holder
TANIZAWA SEISAKUSHO
5.00(2)
6.82 - 9.06 SGD
Caution: This product is manufactured in Japanese standards. Please check the specification before you order., Width x Length (mm): 35x80, Compatible Diameter (mm): Up to 15, Weight (g): 12, Material: Polypropylene (PP)
Category Safety Gears > Hard Hats > Hard Hat Related Products > Accessory Holders
Plastic Barricade
MITSUGIRON
71.04 SGD
ADD TO CART
Width (m): 1, Depth (mm): 350, Height (mm): 580, Color: Yellow, Weight (kg): 1.4, Material: [Plate] ABS resin, [legs] Steel, [cover] polyethylene
Category Safety Gears > Traffic Cones, Compartment Supplies > Barricades > A Type Barrier
Full Harness Safety Belt, Lanyards, Tool Belt
Honeywell
4.33(9)
189.90 SGD
ADD TO CART
Certification Number: TIIS-PT0014 (public utility association Institute of Advanced Industrial Safety Technology Association approved), Weight (g): 1580, Belt Width: [Shoulder, thigh] 43, [body] 50, Size: (Corresponding to 190cm, up to 100kg) one-size-fits-all, Material: Nylon, steel, aluminum
Category Safety Gears > Safety Belts > Harness Type
Safety Helmet Hanger
MonotaRO
12.43 SGD
ADD TO CART
Caution: This product is manufactured in Japanese standards. Please check the specification before you order., This product is manufactured in Japanese standards. Please check the specification before you order., Dimension (Height H x Width W) (mm): 230x280, Mounting Pitch: 255 mm (between screw holes), Color: blue, Material: ABS, Compatible: Helmet width about 9-23 cm Storage inner diameter about 15 cm, Specification: To hang 1 PC, Accessories: 2 attachment screws (countersunk head wood screw M4x50mm)
Category Safety Gears > Hard Hats > Hard Hat Racks
New Back Support Belt
KOZUCHI
5.00(4)
42.59 - 45.91 SGD
Purpose: Work carrying waist tools Construction (provisional frame, carpentry, plastering, forestry, landscaping, electric, gas, water, leisure) Ideal for those who engage in any work, Width (mm): 130, Length (mm): 700
Category Safety Gears > Belt, Belt Supporter > Supporter > Support Belt
Eye All Mirror
Daito Press Mfg.
5.00(3)
109.90 SGD
Radius Curvature (mm): 600, Material (mirror): Glass
Category Safety Gears > Road Supplies > Safety Mirror > Mirror > Outdoor Acceptance
Minicon
Anzen Kougyo
35.28 SGD
ADD TO CART
Type: Weight type, Weight (g): 1120, Height (mm): 450, Color: Red, Material: PE resin
Category Safety Gears > Traffic Cones, Compartment Supplies > Traffic Cones > Traffic Cones
Helmet Shield With Ventilation Holes
MIDORI ANZEN
4.80(5)
42.89 SGD
Caution: This product is manufactured in Japanese standards. Please check the specification before you order., Impact Absorption Liner (Polystyrene Foam): Available, Weight (g): 400, Material: ABS, Specification: M-shaped one touch chin strap, slip-off prevention mechanism, intercommunicating pore., Application: For general work Protection against crash, projecting items, and falling items
Category Safety Gears > Hard Hats > Hard Hats
High Visibility Reflective Vest
ThreeM 3M
4.67(6)
29.51 - 30.10 SGD
Girth (cm): 83, Clothes Length (cm): About 57, Shoulder Width (cm): About 35, Tape Width (mm): 50, Size: One Size Fits All, Material: Polyester mesh, (reflective material) 3M Scotchlite reflective fabric
Category Safety Gears > Safety vest and Signal lights > Safety Vest
Cushion
Car-boy
4.50(4)
10.44 - 29.34 SGD
Category Safety Gears > Corner guard and Cushions > H Steel Type and Clip Type
D-Ring
Tajima Tool
7.64 SGD
Weight (g): 45, Compatible: for 50 mm-wide belt
Category Safety Gears > Safety Belts > Safety Belt Related Products > D Ring and D Ring Stopper
Retractable Safety Belt
FUJII DENKO
4.33(9)
92.03 SGD
Body Belt Length (mm): 1200, Trunk Belt Width (mm): 50, Lanyards (permissible length) (mm): 1700, Lanyards (strap width) (mm): 18, Hook Full Length (mm): 219, Hook: FS-90, Hook Opening (mm): 50
Category Safety Gears > Safety Belts > 1 Hanging (Winding Type)
Waist Belt
Tajima Tool
4.00(5)
58.33 - 66.09 SGD
Caution: Not a safety belt, Thickness (mm): 35, Width (mm): 130, Material: Made of nylon
Category Safety Gears > Belt, Belt Supporter > Supporter > Support Belt
LED Baton Light
TRUSCO
3.25(4)
31.73 - 45.59 SGD
Purpose: For general site of work., Number of Using LED (Piece): 8, Continuous Opreration Time: 60 hours (using alkaline batteries), Color: Red
Category Safety Gears > Safety vest and Signal lights > Safety Baton
Patrol Vest
MonotaRO
7.08 SGD
ADD TO CART
Clothes Length (cm): About 60, Waist (cm): Free (- up to 120), Standard: EN471 fit, Tape Width (mm): 50 (reflective tape), Color: Orange x Silver, Material: (Best) 100% Polyester, (reflective tape) PVC, Specification: hook and loop fastener Tape attached
Category Safety Gears > Safety vest and Signal lights > Safety Vest
Earmuff, Extreme Noise Work Type
ThreeM 3M
57.15 - 57.86 SGD
Category Safety Gears > Ear plugs and Earmuffs > Ear Muffs
Traffic Cone
Kitamura Industry
4.67(3)
31.47 - 45.97 SGD
Pipe Diameter (phi mm): 34, Color: Tiger, Material: ABS, PE
Category Safety Gears > Traffic Cones, Compartment Supplies > Traffic Cones > Cone Bar
Hard Hat, Helmet
MIDORI ANZEN
5.00(1)
26.07 SGD
Caution: This product is manufactured in Japanese standards. Please check the specification before you order., Interior: FP-2 INTERIOR (PLASTIC), Weight (g): 365, Material: ABS, Specification: M-shaped one touch chin strap, slip-off prevention mechanism, Application: For general work, electric operation, and flying and falling objects
Category Safety Gears > Hard Hats > Hard Hats
Shoulder Strap
PROSTAR
4.00(2)
29.75 SGD
ADD TO CART
Purpose: Charging drill, flashlight, gun cutter, hammer cutters, Material: P.P, Specification: With carabiner and bit holder Insert belt loop into carabiner. It stabilize toll without moving.
Category Safety Gears > Belt, Belt Supporter > Belt
Shoulder Megaphone
Noboru Electric
4.00(1)
299.90 SGD
ADD TO CART
Shoulder Band Length (mm): About 950, Dimensions (Bore)(mm): 210, Effective Distance (m): (JEITA) About 400 during audio, Standard Duration (h): (JEITA) About 13 during audio, Batteries: 6 C-type batteries (not included), Rated Output (W): 13, Maximum Output (W): 20, Color: Ivory white, Weight (kg): About 1.1 (excluding batteries), Overall Length (mm): 320, TRUSCO Part Number: 213-5639
Category Safety Gears > Megaphone, Whistle, and Microphone > Megaphone
Hard Hat, Helmet
TOYO SAFETY
28.05 - 30.33 SGD
Category Safety Gears > Hard Hats > Hard Hats
Hand Megaphone Mini
Asahi electrochemical
4.33(6)
28.30 SGD
ADD TO CART
Effective Distance (m): (By the use situation, there is a case where effective distance is different) 80 - 70, Batteries: Six AA batteries (not included), Battery life (hours): Domestic when using alkaline batteries / non-waterproof (continuous use in volume intermediate position) about 28 , Noise Level (dB): 98 (5m), Dimension (cm): Length 7.5 15.5x grip portion length diameter 9.7x (28 shoulder strap - 42), Maximum Output (W): 5, Weight (g): (Including battery strap) 275, Material: ABS resin, Specification: Emergency siren, shoulder belt with folding handle
Category Safety Gears > Megaphone, Whistle, and Microphone > Megaphone
Door Locker
VESSEL
4.67(3)
9.47 - 13.75 SGD
Category Safety Gears > Security Equipments > Simple Lock and Guard
Tool Holster
TRUSCO
2.33(3)
33.02 SGD
ADD TO CART
Depth (mm): 75, Weight (g): 365, Height (mm): 270, Width (mm): 190, Material: 600D polyester, TRUSCO Part Number: 284-7418, Compatible: Waist size up to 135cm, Application: For on site work. Electric construction and various repairs.
Category Safety Gears > Pouch, Tool Bags, and Carrying Case > Waist Pauch
MP Type Helmet
MIDORI ANZEN
4.00(1)
27.16 SGD
Caution: This product is manufactured in Japanese standards. Please check the specification before you order., Purpose: For general work, electrical work, Weight (g): 400, Material: ABS
Category Safety Gears > Hard Hats > Hard Hats
Expert Craftsman, Black Leather Reinforced Hardware, Hacker Feed
H&H
4.00(1)
42.91 SGD
ADD TO CART
Depth (mm): 155, Dimensions (Height H x Width W x Depth D) (mm): 270x100x50, Compatible Belt Width (mm): 60, Material: Body / black cow hide Rivet/steel, Type: Hacker feed, rebar tools
Category Safety Gears > Pouch, Tool Bags, and Carrying Case > Tool Pauch > Other
Waist Supporter Synergy
PROSTAR
4.00(2)
98.15 - 109.90 SGD
Width (mm): Max: 160, minimum: 120, Material: Nylon, polypropylene, polyurethane foam, chloroprene rubber
Category Safety Gears > Belt, Belt Supporter > Supporter > Suspender
Mp Type Helmet
Otokomae MonotaRO
20.61 SGD
Caution: This product is manufactured in Japanese standards. Please check the specification before you order., This product is manufactured in Japanese standards. Please check the specification before you order., Purpose: For flying-falling object protection, during crash, for electrical insulation (withstand voltage 7000V or less, test voltage 20000V in water 1 minute), For flying-falling object protection, during crash, for electrical insulation (withstand voltage 7000V or less, test voltage 20000V in water 1 minute), Impact Absorption Liner (Polystyrene Foam): Available, Outer Dimensions (Length L x Width W x Height H) (mm): 265x220x152, Standard: It conforms to public welfare Ministry of Labor protective hat standard, Weight (g): 410, Material: ABS resin
Category Safety Gears > Hard Hats > Hard Hats
DIC Helmet, Hard Hat
DIC
35.09 - 37.94 SGD
Outer Dimensions (Length L x Width W x Height H) (mm): 255x208x134
Category Safety Gears > Hard Hats > Hard Hats
Ear Muffs
TRUSCO
51.93 SGD
ADD TO CART
NRR Value: 27dB, Standard: ANSI (American National Standards Institute) certified products, Weight (g): 310, Height (mm): 195 to 230, Width (mm): 133, Material: Ear cover: ABS resin, polyvinyl chloride (PVC) headband: Steel, TRUSCO Part Number: 364-6386, Specification: Covered steel headband (soft cushion), up and down adjustable cups
Category Safety Gears > Ear plugs and Earmuffs > Ear Muffs
Hard Hat, Helmet
TOYO SAFETY
26.11 SGD
ADD TO CART
Caution: This product is manufactured in Japanese standards. Please check the specification before you order., Purpose: For protection from falling of flying objects and for electricity., Impact Absorption Liner (Polystyrene Foam): Without, Size (cm): 53 - 64, Weight (g): About 364, Color: White, Material: Hat Body : Thermoplastic ABS resin
Category Safety Gears > Hard Hats > Hard Hats
Goggle Clip
TOYO SAFETY
3.10 - 3.74 SGD
Caution: This product is manufactured in Japanese standards. Please check the specification before you order.
Category Safety Gears > Hard Hats > Hard Hat Related Products > Goggles Clip
Small Cone
Anzen Kougyo
5.00(5)
36.60 SGD
ADD TO CART
Weight (g): 300, Height (mm): 300, Color: Red, Material: Special PE resin
Category Safety Gears > Traffic Cones, Compartment Supplies > Traffic Cones > Traffic Cones
Ear Plugs, Super Fit
ThreeM 3M
1.08 SGD
ADD TO CART
Frequency (Hz)/Sound Isolation Value (dB)/Standard Deviation (dB): 125/35.0/5.1 250/36.0/3.9 500/37.3/3.9 1000/36.8/3.8 2000/40.9/4.5 4000/46.4/5.4 8000/47.7/2.8, NRR Value: 33, JIS Standard: CONFORMITY OF JIS T8161 EP1, Material: Urethane foam, Type: Earplug (form type), TRUSCO Part Number: 344-7201
Category Safety Gears > Ear plugs and Earmuffs > Earplugs
Shin Guards
KIRIMARU
3.00(2)
22.92 SGD
ADD TO CART
Purpose: It protects your shins from scatter during bush cutter working, Weight (g): 470, Color: Black, Dimension (mm): 400x240x90, Material: PP
Category Safety Gears > Belt, Belt Supporter > Protective Supplies
Full Harness Safety Belt, Lanyards
FUJII DENKO
4.17(6)
139.90 - 169.90 SGD
Shoulder and Thigh Belt Width (mm): 45
Category Safety Gears > Safety Belts > Harness Type
DIC Helmet Sya-X, With Liners
DIC
5.00(1)
46.15 SGD
Caution: This product is manufactured in Japanese standards. Please check the specification before you order., Withstands voltage well but not suitable for use in high temperature. Not for electromagnetic wave protection, Purpose: For protection from falling of flying objects and for protection from falling. Electric resistance, Head Circumference (cm): (Estimated) 55.5 - 61.0, Impact Absorption Liner (Polystyrene Foam): Available, Inside Dimension (Width x Depth D): 204x230mm, Outer Dimensions (Length L x Width W x Height H) (mm): 283x226x148, Weight (g): 410, Material: ABS resin
Category Safety Gears > Hard Hats > Hard Hats
Ear Plugs, "Classic"
ThreeM 3M
0.96 SGD
ADD TO CART
Mass (g/piece): 0.15, NRR Value: 29, Code: Not available, JIS Standard: JIS T8161 EP-1 (CLASS 1) COMPLIANT, Type: No cord, Size: One Size Fits All, Material: Vinyl chloride, TRUSCO Part Number: 344-7189, Specification: JIS T8161 EP-1 (CLASS 1) COMPLIANT, w/ case
Category Safety Gears > Ear plugs and Earmuffs > Earplugs
L-Shaped Bracket, Lightweight Wall Fixed Alternate Use
TRUSCO
3.50 SGD
ADD TO CART
Compatible Size: M6x45, Depth (mm): 40, Height (mm): 70, Color: Silver, Width (mm): 35, Material: Steel, TRUSCO Part Number: 512-1973, Accessories: Bolt nuts for body mounting (BN20: step M6x20) with 1 set
Category Safety Gears > Disaster prevention product > Fall Prevention Products > Fall Prevention Products
Non-Slip Mat
AS ONE
3.00(1)
14.43 - 14.55 SGD
Dimensions (Width x Length) (mm): 295x1500, Material: PMMA (acrylic) + PVC (polyvinyl chloride)
Category Safety Gears > Disaster prevention product > Fall Prevention Products > Non Slip Mats
Earmuff, Super-Thin And Light Type
ThreeM 3M
43.20 SGD
ADD TO CART
NRR Value: 21, Standard: US ANSI Z 3.19-1974, Type: Neck band type, Weight (g): 120
Category Safety Gears > Ear plugs and Earmuffs > Ear Muffs
Pioline Safety Tape
DIATEX
4.31 - 9.80 SGD
Adhesive Force (N/25mm[gf]): 6[600], Tape Thickness (mm): 0.16, Base Material: Polyethylene cloth
Category Safety Gears > Safety stripe tape
Safety Reflective Vest
BS
3.50(4)
22.19 - 22.45 SGD
Clothes Length (cm): 52, Waist (cm): Up to about 100 cm, Weight (g): About 135, Size: One Size Fits All
Category Safety Gears > Safety vest and Signal lights > Safety Vest

1 2 3 4 5 6 7 8 9 10 ...57 Next