Buy more than* S$200* and get FREE SHIPPING

Cutting Tool, Grinding Tool and Measurement Tool

Sort by:
Showing 1 - 30 of 24,721 Results
Show: 30 60 90
VIEW: Grid View List View
Digital Multimeter
Sanwa Electric Instrument
41.79 SGD
ADD TO CART
Duty Ratio: 0.1 - 99%, Trunking: Buzzer sounds at 10ohm - 120ohm Open-circuit voltage : 0.4V, Diode Test: Open voltage about 1.5V, DC Voltage (V): 400m/4/40/400/500, Resistance (omega): 400/4k/40k/400k/4M/40M, AC Voltage (V): 4/40/400/500, Dimensions (Height H x Width W x Depth D) (mm): 108x56x11.5, Condenser Capacity (microF): n/50n/500n/5micro/50micro/200microF, Power: Coin type lithium battery CR2032(3V)x1, Cycle(Hz): 9.999/99.99/999.9/9.999k/60.00kHz, Weight (g): 85 (Body only), Type: Digital multimeter, TRUSCO Part Number: 284-8546, Accessories: Notebook type case Coin cell battery
Category Cutting Tool, Grinding Tool and Measurement Tool > Measurements Supplies > Electrical Measuring Device, Tester Etc. > Tester (Multimeter) > Digital Tester
Absolute Digimatic Calipers
Mitutoyo
399.90 SGD
Sum Roller: Available, External Output Terminal: Available, Battery Life: About 3.5 years (continuation 20000 hours), Maximum Response Speed: No limit, Repeat Pricision (mm): 0.01, Quantization Error: +/-1 count is not included., Minimum Displayed Amount (mm): 0.01, Power: SR44(button type silver oxide cell)x1, Specification: ABS (absolute) measurement function INC(incremental) measurement function Scale dirt detection function Battery voltage drop warning External output function (by using the separately sold connector cable, it can output the measurement data.) Hold function (by using the optional hold unit, displayed values can be made to “hold” (maintain).Cannot be combined with output function.)
Category Cutting Tool, Grinding Tool and Measurement Tool > Measurements Supplies > Calipers, Height Gauge, Depth Gauge > Vernier Caliper > Digital Calipers
Digital Microscope, USB
Kenko Tokina (Kenko)
95.27 SGD
ADD TO CART
Caution: PC is not included, PC is not included, Interface: USB2.0, Sensor: Image sensor / About350000 megapixel CMOS, Dimensions (Width W x Depth D x Height H) (mm): 112x134x220, OS Support: Windows 7/XP(SP2)/Vista(32bit)/7(32bit), Magnification: OticaI/ 50-100 magnifitications / 100- 200magnifitications, 200 - 400 magnifitications, Power: Microscope / AA alkaline battery 3pieces (LED light source) Digital viewer / from PC(USB connection), Weight (g): Microscope / about 320(accessories not included) Digital viewer / about 67, Accessories: Tweezers, syringe, slide glass, CD-ROM, instruction manual
Category Cutting Tool, Grinding Tool and Measurement Tool > Measurements Supplies > Optical Measuring Instrument, Loupe, Magnifying Glass, Microscope and Telescope > Scope
Stopwatch
Casio Computer
4.75(8)
29.02 SGD
ADD TO CART
Time Accuracy (%): 99.997685, Battery Life: About 3 years, Batteries: CR-2025 (attachment for monitor), Dimensions (Height H x Width W x Depth D) (mm): 62x63.5x17, Weight (g): 40.3, Color: Black, Material: Resin, Specification: 1/100 second measurement, 10 hour meters (normal measurement, addition measurement, lap split measurement and 1.2 rank simultaneous measurement)
Category Cutting Tool, Grinding Tool and Measurement Tool > Measurements Supplies > Electrical Measuring Device, Tester Etc. > Stopwatch and Timer > Stopwatch
Antistatic Wrist Strap
MonotaRO
5.12 SGD
ADD TO CART
Band Size (Width x Length)(cm): 2x about 17 (circumference of round - elastic), Current Limiting Resistor Value: 1Mohm (+/-5%), Ground Wire Length (m): (Practical use) about 1.5, Band Width (mm): 20, Weight (g): 30
Category Cutting Tool, Grinding Tool and Measurement Tool > Solder Products and Electrostatic Discharge Articles > Straps > Wrist Strap
Sharpening Stone
NANIWA
26.20 SGD
ADD TO CART
Material (Unit): ABS Resin, ABS resin, Grinding Stone Size (mm): 175x55x25, 175x55x25, Type: for medium grindstone, finishing grindstone, Weight (g): 595, 595, Abrasive Material: fused alumina, Fused alumina, Grain Size: #1000/#3000, # 1000 - # 3000
Category Cutting Tool, Grinding Tool and Measurement Tool > Abrasive > Hand Grinding > Whetstone > Sharpening Stones
Replacement Filter
Hakko
4.00(4)
17.43 - 29.15 SGD
Specification: Charcoal granules filter
Category Cutting Tool, Grinding Tool and Measurement Tool > Solder Products and Electrostatic Discharge Articles > Solder and Flux > Solder Puffing Device > Options
General Purpose Pressure Gauge
Daiichi Keiki Seisakusho
37.74 - 54.19 SGD
Outer Diameter (phi mm): 100, Joint Size: G3/8B (PF)
Category Cutting Tool, Grinding Tool and Measurement Tool > Measurements Supplies > Dynamometer, Load Cell, Torque, Pressure and Flowmeter > Pressure Gauge > Pressure Gauge
King finishing abrasive
King Stone
5.00(9)
53.79 SGD
ADD TO CART
Purpose: For superfinishing of inner cutlery and stainless steel cutlery.For cooking knife, knives, carving knives, planes, chisels, scissors, electric Planer knives, and other precision blades., For superfinishing of inner cutlery and stainless steel cutlery.For cooking knife, knives, carving knives, planes, chisels, scissors, electric Planer knives, and other precision blades., TKG Part Number (2015): 5-0289-2701, Dimension (mm): 210x73x22, 210x73x22, Grain Size: 6000, 6000, Material: Special abrasive materials, Accessories: exclusive use stand, Exclusive stand
Category Cutting Tool, Grinding Tool and Measurement Tool > Abrasive > Hand Grinding > Whetstone > Sharpening Stones
Neodymium Magnet
Magna
3.00(1)
78.90 SGD
Category Cutting Tool, Grinding Tool and Measurement Tool > Measurements Supplies > Magnetic Tool > Rare Earth Cobalt Magnet
M-Standard Calipers, Vernier Caliper
Mitutoyo
60.06 - 1,179.90 SGD
Minimum Scale (mm): 0.05, Series: 530
Category Cutting Tool, Grinding Tool and Measurement Tool > Measurements Supplies > Calipers, Height Gauge, Depth Gauge > Vernier Caliper > Standard Type Calipers
Laser Distance Meter
BOSCH
4.67(6)
279.90 SGD
ADD TO CART
Measurement Pricision (mm): Distance measurement: +/- 1.5 standard measuring time / inclination measurement: +/- 0.2 degree (retouched) tilt angle deviations up to 45 degree +/- increase or decrease 0.01 degree.Deviation increases or decreases depending on the measuring environment., Storage Temperature Range (degree c): -20 - +50, Dust-proof Water-proof: IP54 (except battery compartment), Lazer Dot Diameter (phi mm) [Distance (m)]: (For measuring 10 m distance, 25 degree c ambient temperature) About 6, Measuring Range (m): Distance measurement: 0.05 to 80 / Pythagorean measurement slope:-60 to + 60 degree / tilt measurement: 0-360 degree, Measuring Unit: Distance measurement :0.1mm/ inclination measurement: 0.1 degree, Wavelength (nm): 635, Mounting Screw Hole Size: 1/4 inch [6.35 mm] (fo...
Category Cutting Tool, Grinding Tool and Measurement Tool > Measurements Supplies > Range Finder / Scale, Square, Measuring Tape and Scale > Range Finder > Laser Distance Meter
Sharpening Stone,  "King Deluxe"
King Stone
28.05 - 33.42 SGD
Purpose: Rough sharpening (300 grain) for: planes, chisel and variety of knives Fot medium finishing (800 to 1,200 granularity) : for stainless steel knife, flick knife planers, chisels, kitchen knives, scissors, knives, and other precision blades, Rough sharpening (300 grain) for: planes, chisel and variety of knives Fot medium finishing (800 to 1,200 granularity) : for stainless steel knife, flick knife planers, chisels, kitchen knives, scissors, knives, and other precision blades, Material: special abrasive, Special abrasive materials
Category Cutting Tool, Grinding Tool and Measurement Tool > Abrasive > Hand Grinding > Whetstone > Sharpening Stones
Digital Vibration Meter
Showa Sokki
5.00(1)
1,189.90 SGD
ADD TO CART
Purpose: Vibration measurement for blowers used in automotive coating after drying. Vibration measurement of large-sized computer. To determine the electromagnetic valve actuation condition. Defect inspection of machine tools. General purpose engine m, Vibration measurement for blowers used in automotive coating after drying. Vibration measurement of large-sized computer. To determine the electromagnetic valve actuation condition. Defect inspection of machine tools. General purpose engine m, Battery Life (continuous use): 30 hours or more, Frequency Range (Hz): Acceleration: 5 to 5000 (+/- 1 dB), 5-10,000 (+/-3 dB) Speed: 10 to 1000 (based upon rated JIS B 0907 in relation with measuring instruments vibrating severely) Displacement: 10 to 1000 (1 dB), Detector: MODEL-2304A, Dimensions ...
Category Cutting Tool, Grinding Tool and Measurement Tool > Measurements Supplies > Environment Measuring Instruments > Environmental Measuring, Wind speed, Weather, Dust, Heater > Noise Level Meter, Seismograph, Vibration meter > Vibration Meter
Precise Level
Obishi Keiki Seisakusho
5.00(1)
209.90 - 359.90 SGD
Category Cutting Tool, Grinding Tool and Measurement Tool > Measurements Supplies > Goniometer and Spirit Level, Level and Survey > Precision Level
Welding Gauge
Niigata Seiki
5.00(1)
89.23 SGD
ADD TO CART
Undercut Measuring Range (mm): 25, Pricision: Length accuracy +/-1 Angular accuracy +/-2degree, Dimension (mm): 95x68, Thickness (mm): 1.5, Material: Stainless steel (SUS420J2), Type: Welding gauge
Category Cutting Tool, Grinding Tool and Measurement Tool > Welding Supplies > Welding Gauge
Anti Static Mat
AS ONE
4.00(1)
79.48 - 129.90 SGD
Surface Resistance Value (ohm): Diffusion layer / 5 x 10 7 - 10 9 , conductive layer / 5 x 10 3 - 10 4 , Tensile Strength: 140kg/cm, Thickness (mm): 2, Material: NBR (nitrile rubber)
Category Cutting Tool, Grinding Tool and Measurement Tool > Solder Products and Electrostatic Discharge Articles > Mat, Sheet and Film > Electrostatic Discharge Mat and Sheet > Mat
Rubber Plastic Hardness Tester Standard
KORI SEIKI MFG
409.90 SGD
ADD TO CART
Spring Load Value 0 to -100 Degrees (mN): 550 - 8050, Minimum Scale Value: 2 degree, Dimensions (Width W x Depth D x Height H) (mm): 56x27x113, Needle Shape: Diameter 10mm, Weight (g): 280, Measuring Range: 0 - 100 degree
Category Cutting Tool, Grinding Tool and Measurement Tool > Measurements Supplies > Other Measuring Instruments > Hardness Tester
Screw, Extractor Set
ESCO
5.00(2)
37.92 - 46.43 SGD
Category Cutting Tool, Grinding Tool and Measurement Tool > Cutting Tool > Extractor > Set Products
Digital Force Gauge
SHIMPO
554.26 SGD
Pricision: +/-0.3R.C., Dimension (Length L x Width W x Thickness) (mm): 147x75x38, Accessories: -
Category Cutting Tool, Grinding Tool and Measurement Tool > Measurements Supplies > Other Measuring Instruments > Force Gauge
Diamond Sharpener
H&H
3.00(1)
16.84 - 22.63 SGD
Width (mm): 15
Category Cutting Tool, Grinding Tool and Measurement Tool > Abrasive > Hand Grinding > File > Diamond File
Digital Scale Mini
AS ONE
4.00(2)
96.28 - 119.90 SGD
Caution: This product is manufactured in Japanese standards. Please check the specification before you order., This product is manufactured in Japanese standards. Please check the specification before you order., Plate Diameter (mm): 120, Power: 3 AA batteries x, or AC adapter (included), Dimension (mm): 205x145x45
Category Cutting Tool, Grinding Tool and Measurement Tool > Measurements Supplies > Scale > Weighing Scale > Digital Weighing Scale
Pressure Switch
Saginomiya Seisakusho
4.12(8)
84.36 - 89.52 SGD
Category Cutting Tool, Grinding Tool and Measurement Tool > Measurements Supplies > Dynamometer, Load Cell, Torque, Pressure and Flowmeter > Accessories
Circle Cutter
TRUSCO
3.00(2)
52.90 SGD
ADD TO CART
Cutting Range (mm): 25 - 125, Dimension F (phi mm): 5.5, Dimension G(mm): Opposite side 7, Dimensions C (mm): 35, Dimensions B (mm): 11.5, Dimensions E (mm): 80, Dimensions D (mm): 37, Dimensions A (mm): 23, Shaft Diameter: Three groove 10mm, Weight (g): 191, Material: Body: S45C blade part: SKH-51 drill part: high-speed steel, Accessories: Iron for blade (TCC-125KA) x1 sheet, 3mm hex wrench
Category Cutting Tool, Grinding Tool and Measurement Tool > Cutting Tool > Drill > for Concrete > Concrete Drill
Welding Electrode
MonotaRO
17.82 - 45.90 SGD
Caution: During welding , If you inhale the generated gas or fumes, it may cause damage to your health . So please use exhaust , ventilation or wear protective equipments ., During welding , If you inhale the generated gas or fumes, it may cause damage to your health . So please use exhaust , ventilation or wear protective equipments ., Purpose: Welding of car, bridge, lightweight steel frame, and construction., Welding of car, bridge, lightweight steel frame, and construction., Standard: JISZ3211 D4303 equivalent product
Category Cutting Tool, Grinding Tool and Measurement Tool > Welding Supplies > Welding Rod > For Mild Steel and High Tensile Steel
Diamond Paste
MonotaRO
13.53 - 15.16 SGD
Oil Base or Water Base: water-based
Category Cutting Tool, Grinding Tool and Measurement Tool > Abrasive > Abrasive Material > Diamond Polishing
Digital Carbon Caliper
MonotaRO
20.98 - 22.62 SGD
Caution: Replace the batteries in case of no power or display flashes., Replace the batteries in case of no power or display flashes., Replace the batteries in case of no power or display flashes., Replace the batteries in case of no power or display flashes., Storage Humidity (%): 0-80, Storage Temperature (DegreeC): - 20-70, Repeat Pricision (mm): 0.1, Minimum Scale (mm): 0.1, Power: SR44 battery, Operating Temperature Range (deg C): 0-40, Accessories: Monitor battery
Category Cutting Tool, Grinding Tool and Measurement Tool > Measurements Supplies > Calipers, Height Gauge, Depth Gauge > Vernier Caliper > Digital Calipers
Point tap (for general use) (EX-POT)
OSG
8.50 - 889.90 SGD
Chamfer Lcf: 5P
Category Cutting Tool, Grinding Tool and Measurement Tool > Cutting Tool > Tap, Dies > Tap > Point Tap
Sharpening Stone Board
GISUKE
3.00(8)
18.59 SGD
Purpose: Resharpening of the various cutting tools and knives. Rough sharpening for # 150: ideal for a significant revision of the blade when necessary. Mid sharpening for # 400: ideal for small nicks or sharpening in the edge adjustment. Mid sharpening for # 1000, Resharpening of the various cutting tools and knives. Rough sharpening for # 150: ideal for a significant revision of the blade when necessary. Mid sharpening for # 400: ideal for small nicks or sharpening in the edge adjustment. Mid sharpening for # 1000: perfect for everyday care and resharpening. Grinding / sharpening for #150/#800: Knicked blade, blade adjustment, and resharpening can be done with just this one.
Category Cutting Tool, Grinding Tool and Measurement Tool > Abrasive > Hand Grinding > Whetstone > Sharpening Stones
Soldering Station
Hakko
4.33(3)
239.90 SGD
Caution: Mouse cap sold separately., Power Cord: Three core rubber cord, Trowel Mass (g): (Cord) 46, Overall Length of Trowel Part (mm): (Cord) 217, Cord of Trowel Part (m): 1.2, Trowel Leakage Voltage: Less than 2mV, Trowel Part Consumption Power: 65W(26V), Station Output: 26V, Resistance between Iron Tip Ground(ohm): 2 or less, Station mass (kg): About 1.2 (cord), Station External Dimensions (mm): 100(W)x120(H)x120(D), Standard Iron Tip: T18-B, Plug: Two-pole grounding type plug, Power Consumption (W): 70, Power (V): AC100 50/60Hz
Category Cutting Tool, Grinding Tool and Measurement Tool > Solder Products and Electrostatic Discharge Articles > Soldering iron and Soldering related products > Soldering Iron > Electric Type

1 2 3 4 5 6 7 8 9 10 ...825 Next